I have some reports that I'm updating that were originally
designed with the CF7 related builds of Report Builder. Those
builds had an option to change the grid spacing. The CF8 related
build doesn't seem to have that option and none of my report
objects are aligning to the default 1/10 inch setting. This is
pretty annoying becuase I can't easily line everything up anymore
and the default grid/snap is too large for my needs. I recall the
old spacing setting didn't really make much sense, but at least you
could find a setting that gave you a space smaller than 1/10 of an
inch.
Another thing I noticed, if you have 1 inch with 10 grid divisions, shouldn't the grid snap set objects at 1.0, 1.1, 1.2, ..., 1.9 inches? It is setting objects to 1.0, 1.0972, 1.1944, 1.2917, 1.3889, 1.5, 1.5972, 1.6944, 1.7917, 1.889, 2.0.
Ideally, I'd like to snap to 1/16 of an inch. In the older version, I think I used to set the spacing value to "3", whatever that meant.
Jason
Another thing I noticed, if you have 1 inch with 10 grid divisions, shouldn't the grid snap set objects at 1.0, 1.1, 1.2, ..., 1.9 inches? It is setting objects to 1.0, 1.0972, 1.1944, 1.2917, 1.3889, 1.5, 1.5972, 1.6944, 1.7917, 1.889, 2.0.
Ideally, I'd like to snap to 1/16 of an inch. In the older version, I think I used to set the spacing value to "3", whatever that meant.
Jason